Hobbywing XeRun AXE R3 Combo for 1/10 Crawlers

Revolutionizing the Rock Crawling Experience with Precision, Compatible with AXE 540/550 series motor for Optimal Performance.'

What's in the box

• 1x XeRun AXE R3 ESC
• 1x AXE 540 or 550 FOC motor

AXE R3 ESC

Experience the Future of Rock Crawling with AXE R3 ESC:

• Enhanced FOC (Field Oriented Control) driving mode delivers unparalleled low-speed torque, surpassing standard brushless setups and even brushed alternatives for an unmatched feel.
• Equipped with a chip-type magnetic encoder, ensuring precise rotor position signals for consistent performance across all terrains.
• Engineered to IP67 standards, the waterproof and dust-proof design allows you to conquer any weather or track condition without fear of damage to the system.
• Intelligent torque output and speed closed-loop control ensure effortless maneuverability and consistent motor RPM under all loads.
• Enjoy customizable drag brake and drag brake rate control, offering up to 200% more braking power than standard brushless systems, providing unprecedented hold on slopes.
• With built-in Bluetooth connectivity, easily configure ESC settings, access ESC data, or update firmware via the HW LINK app on your smartphone.
• Safety is paramount with multiple protections including low-voltage cutoff, thermal protection, fail-safe measures, motor lock-up prevention, and battery reversal protection.
• Full info here

• Word's First FOC brushless system for Rock Crawler. Field-Oriented Control for Super Linearity & High Torque & Extreme Silence.
• The chip-type magnetic encoder inside the motor guarantees consistency between three phases’ signals and always outputs the pure and precise signals indicating the rotor position.
• "POLARITY PROTECTION". Yes. it is not a typo. No more "oops" moment. The chip-type magnetic encoder inside the motor guarantees consistency between three phases’ signals and always outputs the pure and precise signals indicating the rotor position.
• The waterproof and dust-proof design (*IP67 standards) allows the AXE brushless power system to be used in all weather & track conditions without any issue of damage caused to the system from water or dust. Damage to the vehicle caused by water, mud, or conditions should be monitored closely when running in muddy, wet, or adverse conditions.
• Intelligent torque output & speed closed-loop control for easy control, and consistent motor RPM under all loads.
• The motor with 4 poles & 12 magnets, featuring Hobbywing’s “staggered pole” patent has zero cogging effect & torque ripple. It can work smoothly at low speeds. This greatly improves
• the manoeuvrability of rock crawlers at low speeds.
• The new sensor harness, which features the plug-and-screw design, has a silicone O ring inside. The new design & O ring not only provide a firm connection between motor and ESC but solve the “waterproof” challenge for sensor ports.

XERUN AXE 550 R2 Motor Specs:

• p/n: 30401256
• KV: 3300
• LiPo: 2-3S
• No-load Current: 4.7A

XERUN AXE 540L Motor-Specifications

540L 1400KV:

• p/n: 30401253
• LiPo: 2-3s
• No-load Current (A): 1.7
• Motor Lenght: 57.8mm

540L 2100KV:

• p/n: 30401254
• LiPo: 2-3s
• No-load Current (A): 2.7
• Motor Lenght: 57.8mm

540L 2300KV:

• p/n: 30401257
• LiPo: 2-3s
• No-load Current (A): 2.5
• Motor Lenght: 49.8mm

540L 2800KV:

• p/n: 30401255
• LiPo: 2-3s
• No-load Current (A): 3.6
• Motor Lenght: 57.8mm

• 1/10-1/8th FOC brushless motor (Patented)
• Waterproof
• Motor Diameter: 36.0mm
• Length (mm): 63.8mm
• Shaft Diameter: 5mm
• Shaft Length: 16mm
• Pole: 4
• Bearing size: (We do NOT recommend replacing bearing. Replacing a bearing deems non-warranty)
  Front Bearing: D5*D13*t4(695DD)
  Rear Bearing: D6*D15*t5(696DD)