Redox Ultra 45R ESC for Brushed motors RDX-ESCU45R
- Brand
- Redox
- Product code
- RDX-ESCU45R
- VAT
- 21%
- Availability
- 5 pcs
- UPS Standard
- 8,90 €
- Standard and reliable shipping with tracking from UPS. Delivered to your door in a few days.
- UPS Express Saver
- 12,90 €
- Fast express shipping option. Delivered in a 1-2 business days with tracking and flexible delivery options.
- GLS Euro Business Parcel
- 11,90 €
- Standard economy shipping with tracking and flexible delivery options. Delivery in most times in a week.
- DHL Express
- 26,00 €
- Reliable and fast delivery option from DHL Express. Normal delivery in 1-3 business days.
- GLS Euro Business LQ Parcel - Spray
- 23,90 €
- Standard shipping option for Spray paints to all over european mainland. Courier picks up these shipments once a week every Monday which means that this option is always "next week delivery".
- 2s (7.4v)
- NiMh 6v
- NiMh 7.2v
- Suitable For
- 1:10 On-road
- 1:10 Off-road
- Battery Connector
- Tamiya
- Brushed/Brushless
- Brushed
- Waterproof
- No
ULTRA 45R brushed ESC for car and boat use
ULTRA 45R brushed ESC for brushed motors, manufactured by REDOX.
Designed for 400, 500, 600 class motors, suitable for cars and boats.
Main features:
Electronic, 2-way, proportional current ESC for brushed motors class 400, 500, 600.
Brake mode and reverse mode (passive brake, active brake)
Low voltage protection and MOFST overheat protection
Factory installed Quick-Start Program (start without wheel spin)
Stable at low speed
Linear gas curve - immediate response to acceleration
Technical data:
Weight: 38 g
Supply voltage: 2s LiPo (7.4 V) or 5-6s NiXX (6.0 - 7.2 V)
Continuous current: 45 A
BEC: linear, 5.6 V / 2 A
Engine winding limits: 10T / <30000 RPM
Attention! ESC is NOT waterproof. In case of installing the ESC on the boat, adequate moisture protection and level of cooling must be self-installed.
Changing Battery Mode (LiPo / NiMH) on the Redox Ultra 45R ESC
You can switch the ESC’s battery mode (LiPo or NiMH) as follows:
- Hold down the ESC’s white programming button while turning the power on.
- When the ESC starts up, you will hear one or two beeps:
- One beep = ESC is now in NiMH mode
- Two consecutive beeps = ESC is in LiPo mode
- Release the button as soon as you hear the beep(s).
- The ESC is now set to the selected battery mode and ready for use.
These instructions are also listed in the English quick-start sheet supplied with the ESC (section 03).
Product belongs to these categories
Customers who bought this also bought…
Others viewed also these products
