http://www.eurorc.com info@eurorc.com info@eurorc.com MyCashflow eFUEL switching DC Power Supply Up To 30A Continous Power at 9-18V http://www.eurorc.com/product/1920/skyrc-efuel-30a-switching-power-supply Mon, 20 Feb 2012 21:17:02 +0200 Excellent charger with insane 20A output http://www.eurorc.com/product/1919/skyrc-b6-ultimate-400w-dc-charger Thu, 16 Feb 2012 12:09:20 +0200 Small charger but great 10A output http://www.eurorc.com/product/1918/skyrc-imax-b6-ultimate-200w-dc-charger Thu, 16 Feb 2012 10:58:25 +0200 This is the 81 tooth slipper gear from Kimbrough Products for the Team Associated B4 buggy. http://www.eurorc.com/product/1917/kimbrough-48p-slipper-gear-81t Mon, 13 Feb 2012 18:17:57 +0200 This is a optional RPM Gear Cover, and is intended for use with the Associated SC10, B4 and T4 vehicles. RPM gear covers are built to the highest RPM standards of quality, fit, and finish. RPM Gear Covers are made with RPM's trademark blend of bulletproof nylons and carry a lifetime warranty against breakage, and are completely sealed, preventing even the smallest particles from entering the gears. The spur area of this gear cover has been slimmed down for the wing on a B4 to fit over without interference. They also come with two 4-40 SHCS mounting screws that eliminate the stock button head screws. This means easier access to the pinion & spur gears since the gear cover can be removed using a ball driver – no removing the tire to get to those tiny button head screws! This gear cover also includes a over sized, soft plug for quick and easy access to the slipper adjustment nut for instant track side adjustments. http://www.eurorc.com/product/1916/rpm-ae-b4-1-gear-cover-black Mon, 13 Feb 2012 18:14:02 +0200 This is an optional RPM Mini Front Bumper. This bumper is compatible with the Associated B4, T4 and GT2 vehicles, as well as the HPI Firestorm family of vehicles. Race oriented Associated GT2, B4 & T4 owners prefer lightweight, yet effective parts. Weighing in at a mere 5-3/4 grams, it is small in size but big on performance. This mini bumper is 30% thicker than the stock skid plate providing tons of extra skid and impact resistance. The RPM mini bumper extends in front of the vehicle and curves up into a 2” wide bumper that actually performs as a bumper. It protects both the chassis and the hinge pins from frontal impacts and acts as a low-friction skid plate. RPM mini bumpers also use all four bulkhead mounting screws to disperse impacts over a larger area reducing transferred impact forces by over 50%! As a finishing touch, RPM mini bumpers have recessed mounting holes so all those nasty scrapes and crashes will be absorbed by the bumper, not the screw heads! http://www.eurorc.com/product/1915/rpm-ae-b41-mini-front-bumper-blue Mon, 13 Feb 2012 18:10:08 +0200 This is a replacement t-nut, and thrust bolt set for the Team Associated RC10GT2 1/10th scale off-road truck. This set includes one thrust bolt, one thrust bearing cover, two dog bone spacers, and one t-nut. The parts are intended for use with RC10B4, RC10T4, RC10B4.1, RC10T4.1, RC10GT, RC10GT2, and SC10. http://www.eurorc.com/product/1914/team-associated-differential-thrust-bolt-bearing-cover--locking-t-nut Mon, 13 Feb 2012 18:02:49 +0200 This is a replacement Associated Rear Arm Mount and Chassis Plate, intended for use with the Associated SC10 Short Course Race Truck. http://www.eurorc.com/product/1913/team-associated-rear-arm-mountchassis-plate Mon, 13 Feb 2012 18:00:00 +0200 Team Associated Idler Gear http://www.eurorc.com/product/1912/team-associated-idler-gear Mon, 13 Feb 2012 17:57:06 +0200 This is the Team Associated Replacement Differential Gear from Team Associated. This differential gear is intended for use with RC10B4, RC10T4, RC10B4.1, RC10T4.1, RC10GT, RC10GT2, and SC10. http://www.eurorc.com/product/1911/team-associated-differential-gear Mon, 13 Feb 2012 17:54:22 +0200 Team Associated Top Shaft (B4/T4) http://www.eurorc.com/product/1910/team-associated-top-shaft-b4t4 Mon, 13 Feb 2012 17:51:33 +0200 This is a pair of replacement rear caster blocks for the Team Associated RC10GT2 off road truck. These rear caster blocks are set at a 25 degree angle. These are also used on the SC10 short course trucks, as well as the T4.1 truck and B4.1 buggy. http://www.eurorc.com/product/1909/team-associated-25-deg-caster-block-lr Mon, 13 Feb 2012 17:49:12 +0200 This is a set of replacement servo horns from Team Associated. Includes: One Futaba servo horn One JR, KO servo horn One Hitec servo horn One Airtronics servo horn http://www.eurorc.com/product/1908/team-associated-servo-horns Mon, 13 Feb 2012 17:43:02 +0200 This is a Rebuild Kit for CVD for the Associated RC10TB4/T4/GT trucks and buggies. http://www.eurorc.com/product/1907/team-associated-cvd-rebuild-kit-b4t4gt Mon, 13 Feb 2012 17:40:16 +0200 Team Associated Block Carrier Bushings http://www.eurorc.com/product/1906/team-associated-block-carrier-bushings Mon, 13 Feb 2012 16:07:55 +0200 Team Associated Rear Arm Mount (B4/T4) http://www.eurorc.com/product/1905/team-associated-rear-arm-mount-b4t4 Mon, 13 Feb 2012 16:03:05 +0200 Team Associated Wing Mount & Shim Set (B4/T4) http://www.eurorc.com/product/1904/team-associated-wing-mount--shim-set-b4t4 Mon, 13 Feb 2012 15:56:45 +0200 Team Associated Steering Set (B4/T4) http://www.eurorc.com/product/1903/team-associated-steering-set-b4t4 Mon, 13 Feb 2012 15:53:37 +0200 This is the optional hinge pin brace with hinge pins for the Team Associated RC10GT2 1/10th scale off-road truck. Includes one blue anodized hinge pin brace, and two hinge pins. http://www.eurorc.com/product/1902/team-associated-factory-team-hinge-pin-brace-blue Mon, 13 Feb 2012 15:50:03 +0200 Team Associated Front Bulkhead (B4/T4) http://www.eurorc.com/product/1901/team-associated-front-bulkhead-b4t4 Mon, 13 Feb 2012 10:50:58 +0200 Team Associated Rear Shock Tower (B4), New version http://www.eurorc.com/product/1900/team-associated-rear-shock-tower-b4 Mon, 13 Feb 2012 10:47:18 +0200 Team Associated Rear A-Arm (2) (B4) note: Not suitable for B44 http://www.eurorc.com/product/1899/team-associated-rear-a-arm-2-b4 Mon, 13 Feb 2012 10:44:15 +0200 Team Associated Rear Chassis Plate (B4/T4) http://www.eurorc.com/product/1898/team-associated-rear-chassis-plate-b4t4 Mon, 13 Feb 2012 10:35:38 +0200 This is a Associated Gear Differential Transmission Case, intended for use with the Associated SC10, B4.1 and T4.1 vehicles. Requires ASC9832 10x16 bearings and ASC9852 Out drives. http://www.eurorc.com/product/1897/team-associated-transmission-case Mon, 13 Feb 2012 10:32:55 +0200 This is a set of 25 degree caster blocks for the Team Associated RC10B4, T4 and GT2 vehicles. http://www.eurorc.com/product/1896/team-associated-25-degree-caster-block-t4b4gt2 Mon, 13 Feb 2012 10:29:12 +0200 This is a set of two optional Factory Team aluminum front trailing axles from Team Associated. Includes two aluminum axles, two e-clips, and two screws. http://www.eurorc.com/product/1895/team-associated-aluminum-front-axle-blue-b4 Mon, 13 Feb 2012 10:24:44 +0200 Team Associated Front Bumper (B4/T4) http://www.eurorc.com/product/1894/team-associated-front-bumper-b4t4 Mon, 13 Feb 2012 10:04:51 +0200 Team Associated Front A-Arm (2) (B4) http://www.eurorc.com/product/1893/team-associated-front-a-arm-2-b4 Mon, 13 Feb 2012 10:01:08 +0200 Team Associated Rear Chassis & Front Hinge Pin Brace (B4/T4) http://www.eurorc.com/product/1892/team-associated-rear-chassis--front-hinge-pin-brace-b4t4 Mon, 13 Feb 2012 09:58:12 +0200 This is a set of two replacement silver front shock springs from Team Associated. http://www.eurorc.com/product/1891/team-associated-front-buggy-springs-385lb-silver-2 Mon, 13 Feb 2012 09:55:15 +0200